The DIN connectors are available in either single or multimode and are fully intermateable with DIN 47256 type products. Both the singlemode and the multimode connectors use a zirconia ceramic ferrule featuring a pre-polished ``PC`` profile with an enhanced convex spherical end. This allows fast polishing of the fiber and enables the installer to achieve low optical loss with high perfor¬mance physical contact and ensuring maximum repeatability.
The CS® connector was introduced as a replacement to current duplex LC connectors which are too big for newer generation transceiver interfaces and to increase the connector density in patch panels. The CS® connector is operated with a push-pull mechanism having two cylindrical, spring-loaded 1.25 mm ferrules, within a single housing. The CS® connector’s two ferrules are pitched at 3.8 mm apart, which is the minimum possible spacing to meet today’s TOSA and ROSA optics requirement. The CS® connector can be used with 2 mm jacketed cable.
CS® Connector Designed for next generation 200/400G transceiver QSFP-DD and OSFP
The SN® connector is a new duplex optical fiber connector designed for Data Center 400G optimization. The SN® connector was designed to provide individual and independent duplex fiber breakout at a quad style transceiver (QSFP, QSFP-DD, OSFP) as a more efficient, increased reliability, and a lower cost alternative than the MPO connector. SN® has two LC style 1.25 mm diameter zirconia ferrules in a single housing, pitched 3.1 mm apart vs 6.25 mm in a duplex LC connector.
The SN® connector supports up to 2.0 mm jacketed cable
The LC connector is manufactured to meet EIA/TIA 568A, FOCIS 10, IEC 61754-20 and IEC 11801 specifications for optical performance and intermate ability. The LC Duplex fits into the RJ-45 standard cutout and uses the smallest diameter cable jacket in the industry.
The LC connector is manufactured to meet EIA/TIA 568A, FOCIS 10, IEC 61754-20 and CENELEC specifications for optical performance and intermateability. The LC Duplex fits into the SC single adapter standard cutout and uses the smallest diameter cable jacket in the industry.
Connector design and boot size allows both cables diameter termination 2 and 3 mm and fiber type 0.9 mm. In addition to standard boot color, black or red boot color is available.
The OPTOKON introducing new effective harsh environment connector HA series, which is designed for FTTH projects and FTTA (Fiber To The Antenna). Pre connectorized cables significantly reduce cable installation time, saving money and accelerating FTTH subscriber connections, FTTA and various industrial applications
The Master patchcord is equipped with a Master connector according to the specifications below. The master connector is marked and specified with its Serial Number, which ensures traceability of transmission and geometrical parameters. The second connector is a standard type. For the hybrid patchcord version different types of master and standard connector types are also available.
Connector set for various fiber and cable diameter is available.
QUICK-CURETM helps you save time when working in the field.
The OPTOKON Splice On Connector SOCF introduces a field installable connector for use in field conditions. The SOCF is based on fusion splicing technology, the connector is splice the end of the fiber. The factory prepolished ferrule eliminates the need for polishing, adhesives, index matching gels, and crimping in the field. Using a fusion splicer to terminate the connector in the field provides a very reliable connection and minimizes the potential for operator error and expensive connector scrap. In comparison with other field installable connectors technology the spliced SOCF ensures high Return Loss parameter, which practically depends on factory APC and UPC polishing process.
The Master patchcord is equipped with a Master connector according to the specifications below. The master connector is marked and specified with its Serial Number, which ensures traceability of transmission and geometrical parameters. The second connector is a standard type. For the hybrid patchcord version different types of master and standard connector types are also available.
The Master patchcord is equipped with a Master connector according to the specifications below. The master connector is marked and specified with its Serial Number, which ensures traceability of transmission and geometrical parameters. The second connector is a standard type. For the hybrid patchcord version different types of master and standard connector types are also available.
The Master patchcord is equipped with a Master connector according to the specifications below. The master connector is marked and specified with its Serial Number, which ensures traceability of transmission and geometrical parameters. The second connector is a standard type. For the hybrid patchcord version different types of master and standard connector types are also available.
The Master patchcord is equipped with a Master connector according to the specifications below. The master connector is marked and specified with its Serial Number, which ensures traceability of transmission and geometrical parameters. The second connector is a standard type. For the hybrid patchcord version different types of master and standard connector types are also available.
The SFT-P 1xN PLC Optical Splitters are available in 1x4, 1x8, 1x16, 1x32, 1x64 and custom configurations, and comply with Telcordia GR-1209, GR-1221, IEC 67153-031-3/-6 and IEC 60304 requirements. Various packaging types, input and output fibers are available according to the customer demand.
SFT-S35 Dual Windows Wideband
OPTOKON SFT-SWB wavelength independent couplers/splitters are designed to transmit optical signals within the full CWDM wavelength spectrum. With its innovative Fused Technology Process, the SFT series couplers have proven to provide exceptional characteristics for all applications demanding critical performance. These ultra reliable devices feature low backreflection, low insertion loss, and high port isolation over wide temperature and wavelength ranges. The SFT couplers are designed to divide and/or combine different optical signals in optical fiber systems. Splitting ratios can be customer specified between 1%:99% and 50%:50%. Various types of pigtailing and connector terminations are available to meet your requirements. Available in a wide variety of packaging configurations The OPTOKON SFT-S35 dual windows wideband series are operable in both 1310 nm and 1550 nm wavelength range.

SFT- S35-01xN, SFT- SWB-01xN Wavelength Independent Singlemode Dual Windows Wideband Couplers
The LSH adapters are available with or without flange. The dimensions of single adapter is the same as SC type, the same standardized cut-outs will then be used for all adapters which are compatible with SC standard.
In addition to the standard SC adaptesr a wide range of hybrid adapters is provided to enable interconnection between different connector types. The SC adapters can be equipped with protective shutter to eliminate dangerous laser emissions in high power optical systems.
- Duplex adapters
- Quadruple adapters
The MTP adapters are available in Standard Footprint and SC Footprint versions, according to requirement. Refer to fibers interconnection – two various positions of MTP connectors available: Key up to key down (opposed) and key up to key up (aligned, straight) available. This allows to maintain the right position of fibers in connection of two multifibers connectors.
- Broken fibers are removed with piano wire allowing hundreds of insertions
- Accommodates 125 µm clad fiber with Insertion loss < 1 dB
The SFT-A attenuator can be used as attenuation patchcord – cable 2.8 mm or secondary coated fiber 0.9 mm and primary coated fiber installed inside the splice cassette.
OPTOKON and LEMO cooperation and development
Thanks to this partnership, LEMO offers a range of specialized products that are exclusive to their collaboration with OPTOKON. These products include FXW + EDW Patchcords, Internal Breakout Cables with LEMO SMPTE Connectors, a 2U Rack mounted splice panel with FXW 3K.93C plug, a 2U Half Rack module that can carry up to 3 SMPTE connectors (18 cm depth), and FOH - Hybrid Splice Box Splicing and termination, Power connectors for LEMO 3K.93C.
One standout product from this collaboration is the SMPTE Hybrid cable checker. This innovative product is designed to quickly and easily check the integrity of SMPTE hybrid cables, ensuring that they are functioning correctly and ready for use.
Partnership between LEMO and OPTOKON has resulted in the development of high-quality, specialized products that are designed to meet the specific needs of their customers in the fiber optic market.