ASOP - Shielded Fiber Optic Patchcord

ASOP - Shielded Fiber Optic Patchcord

The OPTOKON Shielded Fiber Optic Patchcord enables easy handling and installation in a similar way to standard electrical cable. This most recent version of the Shielded Fiber Optic Patchcord offers increased protection against the possibility of light leakage in order to eavesdrop on the signal while reducing the bending radius below the recommended limit. This unique design ensures an easier construction process therefore reducing the return loss and extending the life span of the optical fiber.
Enquire Now

Features

  • Strong safeguard of optical fibers due to use of metal braid
  • High tensile strength, pressure resistant, re-twist resistance, rodent protected
  • Easy handling similar to electrical cable and easy installation
  • Increased eavesdropping protection
  • Available with MM, SM, PC and APC polished connectors

Specifications

Connectors1:      SC, FC, ST, LC, …
Optical fiber type Multimode Single mode
Polishing technology PC UPC APC
Insertion Loss (IL) ≤ 0.5 dB ≤ 0.25 dB ≤ 0.50 dB
Return Loss (RL) ≥ 30 dB ≥ 50 dB ≥ 60 dB
Repeatability ≤ 0.2 dB ≤ 0.2 dB ≤ 0.2 dB
Optical fiber: Multimode Single mode
Core/MFD (µm) 50±2.5 62.5±2.5 9.2±0.4 @ 1310 nm
10.4±0.8 @ 1550 nm
Cladding diameter (μm) 125±1 125±1
Max. attenuation (dB/km) 3.5 @ 850 nm
1.5 @ 1300 nm		 0.5 @ 1310 nm
0.4 @ 1550 nm

Note:   1) other type on request

 

Flexible EMI Cable Shielding

  • High screening efficiency and low surface transfer impedance values with computer optimization and Quality control automation
  • Average nominal optical closure 99%, minimum or value 93%
  • High expansion and contraction ability with super elasticity
  • Plastic Former that can be easily removed and used as a guide
  • In addition to facilitating the installation of guide hose, it provides protection of the EMI cable shielding braid form.
  • It is produced in 11 different diameters from 3mm to 40mm according cable type
  • It is suitable for cable screening in military standards.

 

Flexible EMI Cable Shielding Cu/Sn* or Cu/Ni*

Wire Size

AWG/mm

 Harness

Tolerance (mm)**

 Coverage % Max. weight

(kg/km)***
Min Ø Max. Ø Minimum Nominal
38/0,10 2,5 5,0 93,00 99,0 12,95

NOTE:

* With tin or nickel -plated copper wire

** Recommended harness tolerance values. Reference values can be increased or decreased according to the application.

*** Max. weight value does not include optical cable weight. The thickness tolerance value for copper wire is ±%3,5 turns.

Ordering code

Single fiber:

AAA

–

AS XX

–

X

–

XXX

AAA                   connector type according  to CON_13-01_EN – ORD_CODE

AS XX                cable and fiber type:       AS S7A1    shielded cable, SM fiber G.657.A1

                                                                  AS OM2     shielded cable, MM fiber 50/125 μm

                                                                  AS OM3     shielded cable, MM fiber 50/125 μm

                                                                  AS OM1     shielded cable, MM fiber 62.5/125 μm

X                        J                                       jumper, patchcord

                          P                                       pigtail

XXX       length (m)

Documents

souborpdf

ASOP - Shielded Fiber Optic Patchcord_2021-10-18.pdf